Tag Archives: Googly Ghouls

Googly Ghouls

Happy Halloween everyone!  Just wanted to share a cute little card I made for the October Creative Crew on Splitcoast Stampers.  I’m just showing my ‘stepped up’ version as I thought it turned out soooo cute!

The base of the card is Lucky Limeade.  I too a piece of Whisper White, ran it through the Web Embossing Folder, layered it onto Basic Black then to the card front using dimensionals.  I took the oval and circle labels from the Ghoulish Ghouls Designer Kit, turned them over to use the backside and added to the card front.  I took another circle label, colored the edge in Pumpkin Pie, layered onto a 2 3/8″ Basic Black Scallop, added a piece of Lucky Limeade Ruffled Ribbon to a Gold Brad then to the label and added to the card front using dimensionals.  I stamped Boooo on Pumpkin Pie, cut with Bitty Banners then added to the card front.  Finally I stamped the bat using Basic Black on Whisper White, cute out and added using dimensionals.  I MEANT to add some googlie eyes but forgot before taking my pictures.

Set(s): Googlie Ghouls
Paper: Whisper White, Basic Black, Lucky Limeade, Pumpkin Pie, Ghoulish Ghouls Designer Kit
Ink: Basic Black
Other: 2 3/8” Scallop Circle Punch, Lucky Limeade Ruffled Ribbon, Gold Brad, Web Embossing Folder, Bitty Banners Framelits, Dimensionals

 

Googly Ghouls

This really is a much more detailed kind of a card than I typically like to do.  And…OH MY…it uses three DIFFERENT prints on the same card!  LORDY BE…what is this world coming too?   You know I like to keep my stuff nice and clean looking without a lot of clutter but I do think this works.

The base of the card is Pumpkin Pie.  From the Howlstooth and Scaringbone dsp I started with the Basic Grey polka dotted paper and added to the card front.  I took the Tangerine Chevron, added a Basic Black Large Scallop edgelit behind it, added to the card front then added a strip of More Mustard.  I took the Vanilla/Black strip, rounded the corners and added using dimensionals.  Next is a piece of Tangerine Tango, cur into a banner and added on a diagonal.  I punched out a 2 1/2″ More Mustard circle and added that using dimensionals.  I stamped Franky, Mummy and bats using Basic Black on Very Vanilla, cut everything out and added those using dimensionals (LOTS and LOTS of dimensionals!).  I stamped boo (didn’t do all the o’s on the stamp…wanted it short) using Basic Black on Pumpkin Pie, cut with the Bitty Banner Framelit and added using dimensionals (of course).  Finally I added some Googlies to finish things off!

Set(s): Googly Ghouls
Paper: Very Vanilla, Pumpkin Pie, Tangerine Tango, More Mustard, Howlstooth and Scaringbone dsp
Ink: Basic Black
Other: Googlies, Corner Rounder, Large Scallop Edgelit, Bitty Banner Framelits, 2 1/2″ Circle Punch, Dimensionals

 

Until next time…HAPPY STAMPIN’!

Googly Ghouls

But before I get to that I’ve made a little card to share with you!  Our Preview Designer Today used the same set for her ADORABLE project and I just couldn’t resist using the same one too!  The base of the card is 4 1/4 x 4 1/4 Basic Grey.  I added a piece of the Tangerine Tango large polka dot print from the Howlstooth & Scaringbone dsp pack using dimensionals.  Next I took a piece of Basic Grey, cut out the center using the Windows Framelits, ran it through the Chevron Folder and added using dimensionals.  I added the circle punch out piece from the Ghoulish Googlies Designer Kit, stamped Boooo form the Googly Ghouls set on Pumpkin Pie, cut out with the large Bitty Banner Framelit, stamped the bat twice using Basic Black, cut out and added using dimensionals.  I added googlies to the bats’ eyes and some Basic Rhinestones to finish it off.

Set(s): Googly Ghouls
Paper: Whisper White, Basic Grey, Pumpkin Pie, Howlstooth & Scaringbones dsp, Ghoulis Googlies Designer Kit
Ink: Basic Black
Other: Chevron Embossing Folder, Basic Rhinestones, Windows Framelits, Dimensionals

 

Until next time…HAPPY STAMPIN’!

Ghoulish Ghouls

It’s time again for another SUO challenge and this time the theme is Bags and Boxes.  Well the Holiday Mini made THAT easy with the FUN Ghoulish Ghouls Designer Kit!

SHHHH…don’t tell!  This is also going to be a mnt in some of my workshops this month!  It’s just too cute NOT to share!  Like I said the Ghoulish Ghouls Designer Kit makes this fun and easy!  I took the Glassine bag and ran it through the Spider Web Embossing Folder.  I stamped the mummy onto the oval tag then took three pieces of the Howlstooth and Scaringbone dsp, cut into banners, added behind the oval tag.  I stamped boo onto a piece of Pumpkin Pie, cut with the Bitty Banners Framelit and added to the oval using dimensional.  I punch two hole in the tag/bag then tied the bag closed using a piece of the Pumpkin Pie/Whisper White Baker’s Twine that came with the kit.  I finished it off with a googlie for the mummy’s eye.  What a fun, fun way to give a Halloween treat!

Set(s): Googly Ghouls
Paper: Pumpkin Pie, Howlstooth and Scaring Bones dsp
Ink: Basic Black
Other: Ghoulish Ghouls Designer Kit, Spider Web Embossing Folder, Bitty Banners Framelits, 1/8” hole punch, Dimensionals

 

 

 

 

Googly Ghouls

The base of the card is Tangerine Tango.  I took a piece of the Howlstooth and Scaringbone Basic Grey Polka Dotted dsp, cut into a banner, added a strip of the black/grey print, a piece of Pumpkin Pie 1/8″ Taffeta Ribbon then added to the card front.  Those fun ovally shapes are from the Ghoulish Ghouls Designer Kit…one is the front side and the other the back.  I added these to the card front using dimensionals.  I stamped the boo in Tangerine Tango on the one before adding.  I stamped the mummy and bat using Basic Black on Whisper White, cut out and added using dimensionals.  I tied a little bow with the Pumpkin Pie 1/8″ Taffeta Ribbon and added using a Glue Dot then added some googlies to finish things off!

Set(s): Googly Ghouls
Paper: Whisper White, Tangerine Tango, Howlstooth & Scaringbone dsp, Ghoulish Ghouls Designer Kit
Ink: Basic Black
Other: Pumpkin Pie 1/8″ Taffeta Ribbon, Dimensionals

 

Until next time…HAPPY STAMPIN’!

 

Googly Ghouls

The base of the card is Tangerine Tango.  I took a piece of the Howlstooth and Scaringbone Large Polka Dotted dsp and added to the card base.  Next I added apiece of the black/grey print and a strip of the Champagne Glitter paper.  I took a piece of Very Vanilla, added a black edge under it than another strip of the Champagne Glitter paper.  This is added to the card from using dimensionals.  I stmaped Frank and Mummy using Basic Black on Very Vanilla an added using dimensionals.  Boo is stamped in Basic Black on Tangerine Tango, cut with Bitty Banner framelit and added to card front.  Next was a 1″ Champagne Glitter Circle, added with a dimensional, bat in Basic Black, cut out and added to the circle.  Finally…it just HAD to have some googlies so those were added to Frank, Mummy and Bat.  How fun and easy is that?

Set(s): Googly Ghouls
Paper: Very Vanilla, Tangerine Tango, Howlstooth& Scaringbone dsp, Champagne Glitter Paper
Ink: Basic Black
Other: 1″ Circle Punch, Bitty Banners Framelits, Finishing Touches Edgelits, Googlies, Dimensionals

 

 

Googly Ghouls

Oh…I have not had a chance to play in the colourq challenge in such a long time but I just had to make time for the one this week…it is just sooooo perfect for an idea I wanted to do.

Aren’t these just FABULOUS colors?  I LOVE them!  As soon as I saw the colors I immediately thought about a fun Halloween card.  I’m not really a Halloween kind of girl but I have to admit that little mummy in the Goggly Ghouls set is just THE CUTEST!!!  And those googlie eyes?  OH YES!!!!

The base of the card is 4 1/4 x 4 1/4 Whisper White.  I took another piece of Whisper White and added a bunch of pieces (Pumpkin Pie, Tempting Turquoise, Basic Grey, Basic Black) punched with the one Little Labels Punch.  LOVE ‘EM!!!  I did three ‘strips’ of the little label punches.  The panel is added to the card front using dimensionals.  I punched out a Tempting Turquoise Wide Oval punch and used the piercing template to add a pierced oval inside of this.  This is added to the card front using dimensionals.  I stamped the mummy in Basic Black on Whisper White, cut out and added using dimensionals.  I stamped BOO in Basic Black on Pumpkin Pie, cut out with the Bitty Banners Framelit and added using dimensionals and glue dots.  It needed just a little more to finish it off so I added some googlies to the mummy, boooo and two of the punches.

Set(s): Googly Ghouls
Paper: Whisper White, Pumpkin Pie, Tempting Turquoise, Basic Grey, Basic Black
Ink: Basic Black
Other: Little Labels Punches, Wide Oval Punches, Essentials Paper Piercing Templates, Bitty Banners Framelits, Googlies, Dimensionals

 

Until next time…HAPPY STAMPIN’!